Home > News > Content
How To Install Frosted Security Steel Doors
- Jul 29, 2018 -

1) The installation of the frosted  security steel doors should be in accordance with the type of security door used, and the appropriate installation method should be adopted.

(2) The door frame of the frosted security steel doors can be fixed with the expansion bolt and the wall body. The iron piece can be pre-embedded at the hole when the wall is built, and the door frame connecting piece is welded firmly during installation.blob.png

(3) Regardless of the connection method used for the door frame and the wall, there should be no less than 3 anchor points on each side and should be firmly connected.

(4) When installing the frosted security steel doors, it should be straightened and hanged first. After the size is appropriate, temporarily fix it and correct it and adjust it. After the error is correct, the connection can be anchored.

(5) It is required that the sliding door can be pushed and pulled flexibly after installation; the swinging door is convenient to open, the closing is tight and firm, and there is no self-opening phenomenon.

(6) Anti-theft device should be installed between the door frame and the door leaf or other parts.

(7) Hardware accessories such as handles, door locks, and observation holes on the security door must be complete; the password protection lock, electronic alarm password system, doorbell paging and other devices on the multi-function security door must be effectively improved.

(8) The clearance from the ground plane should be no more than 5mm.

Related Products